LED Tri-Proof T8 Fixture 18W-58W IP65 Single Dual Tube

IP65 Rated: Sealed PS/PC cover and ABS/PC base protect lamps from dust, water jets and corrosion.
Single or Dual Tube: Supports 1x18W/2x18W, 1x36W/2x36W and 1x58W/2x58W T8 tube configurations.
Indoor and Outdoor Use: Suitable for car washes, tunnels, warehouses, loading docks and covered walkways.
Standard T8 Compatibility: Accepts G13 base tubes, so replacement lamps are easy to source locally.
Tool-Free Maintenance: Stainless steel clips let the cover swing down for quick relamping.

Etiquetas:

Tri-proof Fixture

DESCRIPCIÓN DEL PRODUCTO

The LED Tri-Proof T8 Fixture is built for locations where dust, moisture and corrosion are daily concerns. It takes standard T8 tubes in single or double configurations, giving buyers a protective housing without locking them into a single lamp brand.

IP65 Protection and Rugged Construction

The enclosure uses a PS/PC cover over an ABS/PC base. This combination resists impact and yellowing while keeping the light output diffused. The gasketed body meets the IP65 rating, which means dust jets and low-pressure water sprays cannot reach the internal components. That rating is important for food processing, parking garages and covered walkways. Sealed end caps close tightly around the tubes and wiring entries. The seal prevents insects and dust from collecting on the lamp surface, which keeps maintenance intervals longer than open batten housings. Stainless steel clips hold the cover in place, so the fixture can be opened for relamping without tools.

Single and Double Tube Configurations

The LED Tri-Proof T8 Fixture supports 18 W, 36 W and 58 W T8 tubes. Single-tube models suit narrow corridors and storage aisles. Double-tube models double the output for wider production floors and underground passages. Buyers choose the wattage per zone and keep one common housing type across the project. Because the fixture accepts standard G13 base T8 tubes, maintenance teams can replace lamps from local suppliers. That flexibility reduces downtime when a tube fails and avoids dependence on a single tube manufacturer.

Indoor and Outdoor Versatility

The LED Tri-Proof T8 Fixture works indoors in car washes, workshops, cold storage and chemical plants. It also works outdoors under canopies, loading docks and tunnels where the luminaire is exposed to rain, dust and temperature swings. The wide operating range suits climates from hot warehouses to refrigerated facilities. Mounting can be surface or suspended. Surface brackets fix directly to concrete ceilings or steel beams. Suspension kits lower the fixture to the required working height in high-bay areas. Both methods use the same end-cap mounting points, so switching between the two does not require extra parts.

Material Choice and Longevity

The PS/PC cover transmits light efficiently and resists the chemical vapors found in industrial cleaning areas. The ABS/PC base provides structural strength without the weight of a full metal housing. Together, the materials resist UV exposure and maintain their appearance after years of outdoor service. The housing protects the tube and driver from physical damage. In busy logistics centers, accidental contact with trolleys and pallets is common. The robust shell keeps the lamp intact and reduces replacement frequency.

Energy and Maintenance Savings

Using the LED Tri-Proof T8 Fixture with LED tubes instead of traditional fluorescent tubes cuts energy use. Less heat is generated inside the enclosure, which reduces thermal stress on the cover and seals. The sealed design also keeps reflector surfaces cleaner, so light output stays higher between cleanings. Relamping is simple. After releasing the clips, the cover swings down for access to the tubes and wiring. Maintenance crews can service the fixture without removing it from the ceiling, which saves labor on large sites with many identical installations.

Why Choose the LED Tri-Proof T8 Fixture

Specifying the LED Tri-Proof T8 Fixture across wet and dusty zones simplifies procurement. One SKU family covers single and double tube needs, three wattages, and both surface and suspended mounting. Contractors order mixed quantities to match each area without managing multiple fixture types. The LED Tri-Proof T8 Fixture is designed for buyers who need reliable lighting in challenging conditions. It combines standard T8 compatibility with a sealed, durable housing, making upgrades from fluorescent to LED straightforward in industrial and outdoor settings.

ESPECIFICACIÓN DEL PRODUCTO

Especificación	Detalles
Modelo	BL‑4031
Product Type	TRI‑PROOF T8 FIXTURE
Power Options	1×18W/2×18W / 1×36W/2×36W / 1×58W/2×58W
Material de la carcasa	PS/PC Cover, ABS/PC base
Application	Indoor or Outdoor use

Escenarios de aplicación

Parking Garages and Tunnels: IP65 sealing and impact resistance protect lamps from vehicle spray and dust in enclosed traffic areas.
Food Processing and Cold Storage: Moisture-resistant housing withstands washdowns and low temperatures in hygienic facilities.
Loading Docks and Canopies: Outdoor-rated materials handle rain, dust and temperature changes at distribution centers.
Workshops and Chemical Plants: Corrosion-resistant cover and base suit industrial atmospheres with cleaning agents and vapors.