X
  • لا توجد منتجات في القائمة

Solar Powered Street Light 30W 60W 90W IP65 Outdoor Solar Lamp

  • Three Power Options: 30W/60W/90W models cover lanes, residential streets, and commercial roads from one product page.
  • Integrated Solar Design: LED module, solar panel, lithium battery, and controller share one IP65 housing.
  • Off-Grid Operation: 6V system charges by day and provides dusk-to-dawn lighting without mains power.
  • Remote Control Included: Switch modes, adjust brightness, and set timers from the ground.
  • Weatherproof Housing: Grey powder-coated aluminum and tempered glass lens withstand rain, dust, and temperature extremes.
- +

مشاركة : مشاركة :

وصف المنتج

The Solar Powered إنارة الشوارع is presented on this page as one product with three selectable power options, so customers can choose the wattage that fits their site without switching housings or mounting hardware. Every Solar Powered Street Light shares the same slim die-cast aluminum body and integrated 6V solar panel, with the 30W, 60W, and 90W models differing mainly in LED count, battery capacity, and overall length. This approach keeps a single product image and one product page while giving buyers real choice between small residential paths and larger commercial roads. Across the three configurations, the core design stays consistent. The 30W model (BL-7040) carries 120 LEDs, an 8-watt solar panel, and a 5000mAh battery inside a 190 x 478 mm body. The 60W model (BL-7041) raises the count to 180 LEDs, pairs a 12-watt panel with a 10000mAh battery, and measures 197 x 600 mm. The 90W model (BL-7042) delivers 240 LEDs, an 18-watt panel, and a 15000mAh battery in a 250 x 630 mm housing. All three use the same 6-volt charging system and IP65-rated enclosure, so performance and weather protection scale together as wattage increases.

Why Choose the Solar Powered Street Light

A key benefit of the Solar Powered Street Light is its off-grid operation. Because the lamp charges from sunlight through its own panel, there is no need to run mains cable, trench the ground, or connect to the grid. Installers mount the unit on a pole or wall bracket, aim the adjustable panel toward the sun, and the system handles the rest. This makes the lineup suitable for rural roads, parking perimeters, and sites where grid power is expensive or unavailable. The integrated panel and lamp body reduce the number of parts to stock and install. A single bracket, a remote control, and the light itself are enough to complete most setups. The included remote lets users switch brightness levels, set a timer, or activate motion-triggered half-brightness mode from the ground, which lowers maintenance visits and improves safety on high poles. Dusk-to-dawn photocell behavior keeps the light running through the night while protecting battery life during low-sun seasons.

Built to Withstand Outdoor Conditions

The black die-cast aluminum housing with tempered glass lens resists rain, dust, and temperature swings. IP65 ingress protection keeps internal electronics dry during storms, while the wide operating temperature tolerance suits hot summer rooftops and cold winter storage yards alike. The slim profile and adjustable tilt angle help installers maximize solar harvest across different latitudes and mounting heights. Because all three wattages share the same form language and control logic, contractors can standardize on one product across a portfolio of sites. A 30W Solar Powered Street Light can illuminate a garden path or residential gate, while a 90W unit provides broad coverage for loading bays, warehouse perimeters, and sports court boundaries. The Solar Powered Street Light therefore fits both one-off homes and multi-site commercial rollouts without a second product line. The daylight-balanced LED chips deliver strong, uniform illumination with minimal color shift over time. Unlike older halogen lamps, the LED source does not concentrate heat at the lens, which reduces fire risk near dry vegetation and keeps insects from clustering around the beam. The instant-on behavior also suits security applications where the light must reach full output as soon as motion is detected.

سيناريوهات التطبيق

Homeowners use the 30W model to brighten driveways, back patios, and detached garages without adding outdoor outlets or digging trenches. Small commercial properties choose the 60W version for parking areas, storage sheds, and service entrances where moderate coverage and long runtime are required. The 90W model is popular on construction sites, farmyards, and car dealership lots that need wider beam spread and higher lumen output for larger perimeters. For each of these uses, the Solar Powered Street Light removes the need for trenching and grid wiring. Across all three sizes, the Solar Powered Street Light keeps the same housing and mounting method, so distributors stock one line and end users get a predictable install. The self-contained design lowers electricity bills and avoids grid dependency.

مواصفات المنتج

المواصفات التفاصيل
نوع الموديل BL-7040 / BL-7041 / BL-7042
Rated Power 30W / 60W / 90W
جهد الإدخال 6V
درجة حرارة اللون 3000K-6000K
Service Life 25000h
IP Rating IP65
أبعاد المنتج 190×478mm / 197×600mm / 250×630mm
Core Highlights 120 LEDs/8W/5000mAh / 180 LEDs/12W/10000mAh / 240 LEDs/18W/15000mAh

سيناريوهات التطبيق

  • Rural Road Lighting: The 30W and 60W models provide reliable road illumination for villages and townships without extending the electrical grid.
  • Parking Lot & Campus Lighting: The 60W and 90W options cover schoolyards, factory parking areas, and commercial lots with uniform dusk-to-dawn light.
  • Industrial Perimeter & Pathway Lighting: The 90W model delivers wide beam coverage for warehouse boundaries, freight terminals, and remote facility access roads.Solar Powered Street Light mounted on pole illuminating rural roadway at night

الأسئلة الشائعة

Q1: How do I choose between 30W, 60W, and 90W?

A1: Match the wattage to road width and lighting requirements. The 30W model suits narrow lanes and paths, 60W covers residential streets and parking lots, and 90W is ideal for main roads and larger perimeters.

 

Q2: What is the battery capacity of each model?

A2: The 30W model uses a 5000mAh battery, the 60W model uses 10000mAh, and the 90W model uses 15000mAh to support longer nightly runtime.

 

Q3: Can these street lights work without grid power?

A3: Yes. Each unit is fully solar-powered with its own panel and battery, making it suitable for remote or off-grid locations.

 

Q4: Are the lights waterproof?

A4: All three models carry an IP65 rating, protecting them against dust and low-pressure water jets from any direction.

 

Q5: What mounting options are available?

A5: The integrated fixture can be mounted on a pole or wall using the included bracket, with the solar panel angled toward the sun.

تواصل معنا

تمكين أعمالك من خلال حلول التخصيص: المصابيح وتجهيزات الإضاءة والمزيد.

يرجى تفعيل JavaScript في متصفحك لإكمال هذا النموذج.

المنتجات ذات الصلة

ما الجديد في Brother Lighting

20 عاماً في معرض كانتون: علامة Brother Lighting البارزة وعروضها الجديدة

طلب عرض أسعار

يرجى تفعيل JavaScript في متصفحك لإكمال هذا النموذج.